Paper Egg Tray Production Line for Coffee Cup Holder Machine

• Customization: Available
• After-sales Service: After Sales Service Provided
• Warranty: 2years
• Model NO.: Wy-2
• Application: Customized
• Drying Function: With Drying Function
• Automatic Grade: Automatic
• Computer Control Panel: Computer Control Panel
• Size: Small
• Certification: CE
• Condition: New
• Product Name: Egg Tray Machine/Pulp Molding Machine
• Guarantee: 2 Years
• Raw Material: Waste Paper Waste Books, Newspapers
• Electricity Power: 20-65kw
• Voltage: 380V/50Hz
• Molds Quantity: 3molds
• Mold Material: Aluminum Molds or as Per Customer′s Need
• Dryer System: Multi-Layer Dryer or Brick Dryer
• Dryer Fuel: Natural Gas, Coal, Diesel
• Workers: 2-6 Persons
• Transport Package: in Container
• Specification: Depends on final capacity
• Trademark: Wanyou
• Origin: Jinan, Shandong
• HS Code: 8441400000
• Production Capacity: 800PCS/H-1000PCS/H

Product Description

Paper Egg Tray Production Line For Coffee Cup Holder machine

Egg Tray Machine Introduction:

Egg tray forming machine is a kind of machine which absorbs paper pulp-the raw material, on the surface of mould by vacuum to get various shape and ratio of wet and dry by regulating time. After such working procedure as transferring moulds, releasing moulds to complete paper tray production.

Egg Tray Machine is also in good use for making fruit trays, like apple trays. Buyer only needs to change the forming molds with apple tray shape, then machine will produce the apple trays. 

Egg Tray Machine Flow-chart:
Raw material--hydrapulper-- Pulp mixing--Forming--Drying-- Hot Press--Packing--Stock
Pulping System
1. Put the raw material and water into the hydraulic pulper, you will get the paper pulp after mixed 10-20 minutes.
2. Pulp pump will transfer the finished paper pulp into the slurry pool.
3. The pulp pond beater will mix the pulp concentration.
4. The pulp pump will transfer the pulp into forming machine.

Molds Forming System
1. The molding machine is to absorb the pulp to the molding mold, which is through the suction of the vacuum system to absorb the excess water into the gas-water separation tank, and then pump the water to the tank for storage.
2. The molding mold absorbs the pulp and then forms it. and then the transfer mold takes out the finished product and sends it to the drying tray.

Drying System
1.Heat source: natural gas, diesel, liquefied petroleum gas and other combustion liquids and gases.The transmission mode adopts industrial transmission chain to drive the net plate transmission, which runs in the drying line.

Technical Specification of Paper Egg tray machine

Model	Mechanization	Working mode	Capacity(Pcs/h)
ZJM-350	Semi-auto or Automatic	Reciprocating	350-400
ZJM-700	Semi- auto or Automatic	Reciprocating	700-800
ZJM-1000	Semi- auto or Automatic	Reciprocating	1000
ZJM-1300	Semi - auto or Automatic	Reciprocating	1300-1500
Remarks:     1. The Capacity calculated base on 30-packed egg tray(size 300x300mm, weight 70g~75g).    2. Workshop size is for reference only and could be adjusted according to actual size of client's plant. 3. The above specification is for reference only, due to continuous technology development, data will be updated from time to time. 4. Pulp Molding Equipment are non-standard equipment, we are able to provide customized solution according to specific requirements from customer. 5. Welcome to contact us anytime, our professional team will provide more effective help and supports for you.

  

Technical Parameters
Egg Tray mould quantity	3pcs	Container Required
Raw material	Waste paper	About 40ft*2+20ft*1(with dryer) About 40ft*1(without dryer)
Output for egg tray	1000pcs/hour
Net weight per piece (gram)	70g-75g
The volume of waste paper consumed	75kg / hour
The volume of water consumed	0.15ton / hour
The natural gas consumption of the dryer(about) Diesel Consumption	35cbm/h 40kg/h
Machine Weight	5-20tons
Egg tray Size	295mm*295mm 30eggs
Remark: buyer needs to build the water and pulp pools themselves. The 1000 pcs/h machine will need to build one water pool and one pulp pool with same size of 2m*2m*1.5m(length*width*height)

 

	Description
Pulping system	Pulping system Including : water pool mix pool mill pulp pump water pump pulp pump 1M³pulping machine
Forming system	Including 1 moulds forming machine  Vacuum pump Compressor  Washer  Vacuum tank Air tank

multi-layer dryer metallic material

This hot press molding machine is selectable. Normally no need to choose this machine if buyer only needs to produce paper egg trays.
Hot Press Molding Machine for paper egg carton, electrical product tray, sprinkler tray, industrial packaging tray

 

 

Certificate of egg tray machine

End Products Of Paper Egg Tray Machine

Paper egg trays are the end products of egg tray plant. Egg trays are good protection shell for eggs during transporting and storage. Usually, the egg trays has 30 holes. Esle, there are 10 holes egg trays, 12 holes egg trays,  24 holes egg trays etc. What's more, if you change the mould, the machine can be used to make apple trays, egg cartons and so on.
Raw materials to make egg trays: original wood pulp, craft paper, A4 paper, paper box, old newspaper, old books and other kinds of recycled papers.




Delivery

Payment Terms
Trade terms		FOB Qingdao
Quotation Validity time		Within 30days
Delivery time		Depends on final egg tray machine capacity type
Payment term		BY T/T 40%DEPOSIT+60%BALANCE.
Time of payment		When the deposit is paid, the machine will begin to be produced. And the balance should be paid by the consignee (the buyer) before the delivery.
Warranty time		Two years after the Egg tray machine received.
TERMS OF DELIVERY		FOB Qingdao Port, China
Package		In container
Installation & Training
1. Usually, all installation and debugging work will be done before shipment.      2. We will dispatch 1 engineer to direct the installation and debugging of the equipment if necessary.(all travel ticket and hotel charge burden by buyer and engineer charges USD100/day for salary ) 3. Remark: buyer needs to build the 2water and 2 pulp pools themselves, with same size of 2m*2m*1.5m(length*width*height)

FAQ: 
Our productionline has Fully Automatic and Semi Automatic two types ,  both have  computer control system .
 
1.  What is Semi Automatic type ?
If only order The 1st and 2nd compulsory parts , that's Semi Automatic because you'll have to do the work of drying up egg tray manually; 
 
2. What is Fully Automat type ?
Meaning:  the production line includes the Drying system and the whole procedure can be done Automatically . 
 
Of course, the price and the required work space would have big difference from the semi-automatic type.
 
3. Quality 
--- Our machines use  UK Technics and part of the components are Germany-made (ex: Ball valve) .
-- Our machine is made by Tooling NOT by Welding ,  insuring a minimum of 10 years' lifespan .
 
-- The Egg tray moulds material is Aluminium which can keep the fixed shape much better than that made of rubber material.
--- 99.9% of Success rate: Even if there is a failed egg tray , just throw it back to Pulping area and it can be re-used avoiding  waste ; 
 
--- Our machine has been sold to worldwide for over 10 years with continued re-order by some customers with their business grow .
4. What kind of material we can use as the raw material?
    Any kind of waste paper like old newspaper,magazines,books,A4 paper etc, and easy to get
 5.  What kind of Fuel can be used for the whole production line?
     Coal, natural gas, and dieseal oil.
 
6. What kind of products can be made by this machine?
 
  All paper package such as paper egg tray, egg carton,egg box, fruit tray, bottle tray, cup tray, consumer      product package, medical disposable container etc.
 
7. Are you a manufacturer?
 
  Yes, Jinan Wanyou has been fabricating pulp molding machine since 2008. We are one of the  most important pulp molding machine manufacturer in the world, and we are famous pulp molding machine manufacturer in China, providing high quality and production capacity pulp molding machinery at reasonable prices to the world.

Our Services
 
(1)Technical consultation ;
(2)Detailed design of customer workshop ;
(3)Installing and testing the whole production line before shipment;
(4)Training engineers and workers;
(5)Supplying spare part for long time;
(6) Online services anytime.